Boost your training strength and speed with our new Speedo x DMC Elite fins. Designed for competitive swimmers and bodysurfers, our must-have short-wing silicone fins use an asymmetrical ankle-stabilizing design to improve swimming speed and kicking efficiency.

Created in partnership with DMC, a pioneer of silicone fins, these fins feature a V-rail that stiffens the edges of the blade, allowing you to achieve the speed and propulsive power of a stiffer fin without the added weight or stiffness.

The ideal silicone competitive swimming fin! Designed for bodysurfers and competitive swimmers looking to gain strength and speed during their training.

A short-wing fin with a V-rail provides similar power to a stiffer fin, with increased comfort.

The asymmetrical design stabilizes ankle movement, increases speed and reduces fatigue.

Silicone material for maximum comfort

V-shaped channel for better water movement during ascending and descending kicks.

Top of the fin, off-center, with evacuation chute for quick kicks.

------ 

VALIDATE YOUR SIZE

All feet are very different, so fitting a foot into a fixed-shaped plantar socket of molded flexible material is an inexact science. Although our fins do not directly match shoe sizes because the construction of fins and shoes are very different, we suggest close to shoe size as a secondary sizing guide.

Please note that each of our fin models has its own mold, so sizes may vary between models. The original training fins, the Elite II and Repellor fins are a universal foot, meaning you can wear either fin on either foot, also giving you a wider foot cavity. Our Elite and Elite MAX are specific to left and right feet.

1: Check the length – Stand on a piece of paper against the wall. Measure to the end of the heel (in the arch) as this is where the strap is - put a dot here. (Should be your foot length +/- 3-5mm)

2: Measure the distance between the front and back points. This should be the length of your foot.

PUT ON YOUR FINS 

DMC fins are made from a silicone-based material that provides maximum comfort, and like most polymers, care must be taken when putting the fin on without overstretching the strap.

Step 1: Push the fin as far as possible onto the foot before pulling the strap

Step 2: Lift the strap on the heel

Step 3: Adjust for Comfort

To see the size chart, click on the “Size guide” tab.